Hello! I am new to nerf modding, and am modding a stryfe as my second project. (First was a maverick) So far I have gotten rid of the mechanical locks and bypassed the thermoster. I am now looking for upgraded batteries. I do not want to use a lipo, as I would probably blow it up somehow, so I just want to use some upgraded double a's. I am looking at buying some worker motors, and I am wondering what batteries I should use for them. I am aware of Trustfires and imr's, but I have also seen 3.7 volt lithium energizer batteries in stores. They have a higher MAH rating, and are cheaper. Will these have the same performance as trustfires/imrs? Also, will they work on the Worker 132 motors I plan on buying? Thanks in advanced! :)
3,947
pages
ALL POSTS
Thank you SO much! That explanation was better than any "Nerf Battery Guide" video I've ever seen! I'll probably go get some honey badgers and some IMR's now, 'cause like I said, I'd probably blow up a lipo XD! That explanation was extremely useful, thanks again!
(Edited by Awesome4lyfe72)
Could I use these in a nerf gun? Would I still need a dummy battery? Here they are: https://www.amazon.com/Energizer-Ultimate-Lithium-Batteries-L91SBP-8/dp/B00EAKP8S0/ref=sr_1_2_sspa?ie=UTF8&qid=1531506857&sr=8-2-spons&keywords=lithium%2Baa%2Bbatteries%2Benergizer&th=1
(Edited by Awesome4lyfe72)
Those are normal 1.5V batteries, they'll just last longer because they've got more amp-hours. So yes, you can use it in a Nerf gun without any dummies, but of course, it's as powerful as any other AA battery, which means unfortunately, you'll only get stock performance out of it.
On a side note, if you don't have any dummy batteries, this video shows you how to make a temporary AA-sized homemade one, out of a Micro dart. I tried it with Trustfires and it works pretty well. In the long term however, it'll probably not last too long because it's literally a roll of aluminium shoved into a dart. Overheating is inevetable. I suggest investing in an actual dummy battery (which go for $1-3 apiece on Amazon, or in packs) or just getting an appropriately-sized steel bolt as a spacer, which is even cheaper. Both are much safer than the Blastaway.eu method, although his dirt-cheap method has served me well.
(Edited by LeoFoamFlingerFish)
0
Look Awesome, I realize there are a million opinions, and a hundred thousand options. But here's a couple links to motors and batteries that perform really really well, from people I've dealt with for many years.
For starters, the folks over at Out-of-Darts offer consistently low prices on MTB Honey Badgers. These are great motors, with speeds around 43,000 RPM at 7.4 volts (ie. 2 IMRS) These babies scream, literally. They are way over the 32K glass ceiling. Like way over.
If you're going with 130s, these On The Way IMRS are a safe, compatible, reliable battery that delivers enough juice for motors like the Honey Badger, and other 6 volt motors.
(Edited by Elliottw)
0
Aaaaargh, those buggers still don't ship to Canada... ?
(Edited by Mojo1970)
FLATtheFISH wrote: Those are normal 1.5V batteries, they'll just last longer because they've got more amp-hours. So yes, you can use it in a Nerf gun without any dummies, but of course, it's as powerful as any other AA battery, which means unfortunately, you'll only get stock performance out of it.
On a side note, if you don't have any dummy batteries, this video shows you how to make a temporary AA-sized homemade one, out of a Micro dart. I tried it with Trustfires and it works pretty well. In the long term however, it'll probably not last too long because it's literally a roll of aluminium shoved into a dart. Overheating is inevetable. I suggest investing in an actual dummy battery (which go for $1-3 apiece on Amazon, or in packs) or just getting an appropriately-sized steel bolt as a spacer, which is even cheaper. Both are much safer than the Blastaway.eu method, although his dirt-cheap method has served me well.
Yeah, I felt stupid yesterday when I saw those energizers in a store yesterday and noticed the "1.5v" printed on the side. Thanks for telling me about blastaway mod, though I'll still probably buy some from amazon. Like I was saying about the LiPo, I would probably find a way to burn my house down!
(Edited by Awesome4lyfe72)
Thanks, Elliot! That helps a lot! Would I have to replace the wires with those batteries? I would, right? If so, which ones should I use? I'm also looking for a micro switch, so what should I get for that?
(Edited by Awesome4lyfe72)
0
You don't have to replace the wiring or the switch to use IMRs, but it doesn't hurt. Basic 18 guage wire is perfect for this application. Stranded wire works best, but solid core works too.
As far as the microswitch, OutOfDarts has nice Omron switches. Radio Shack online also has a nice lever switch for $2 . You can easily remove the lever arm and convert it to a standard push button.
I am using the stock rev trigger switch on several modded Stryfes. So far, so good. Plus, when you sack all the locks you get at least two spare replacement switches.
(Edited by Elliottw)
Thank you! I now know everything I need for a good modded stryfe! So I will get ON THE WAY 3.7v batteries + a charger (I found a combo!), AuKvi AA dummy batteries, Honeybagder 130 motors, some 118 gauge Haerkn wire, and 15a Omron switch. I think that that's all I need. I will now be able to destroy my friends in nerf wars! Thanks for all your help, Elliot, have a good day! :)
(Edited by Awesome4lyfe72)
0
(Edited by Elliottw)