It comes packaged with four Zombie Strike Darts and instructions.
The Crossfire Bow is a crossbow-like blaster and features a priming rod that is connected to its bowstrings, even though the blaster relies on a direct plunger system for firing. It also features a tactical rail, an attachment point for a detachable shoulder stock, an integrated sight and sling points located under and in front of the firing trigger. The blaster features the use of an intelligent air restrictor system. Unlike the SledgeFire or the Hammershot, it does not feature the wrapped cloth design on the handle.
It advertises a firing range of seventy-five feet.
Reloading and firing
To reload the Crossfire Bow, load up to four Zombie Strike darts in the front of the blaster. Pull back the priming rod to fully prime the blaster.
Pull the trigger to fire a dart.
- Sometimes the priming rod gets stuck in the "non-primed" position. Pulling it back with caution fixes the problem.
- The Crossfire Bow was re-released in 2015 as the Blazefire.
- The bowstrings can actually be used as a form of banding to increase the strength of the plunger, but only if tightened or if strengthened.
|The full image gallery for Crossfire Bow may be viewed at Crossfire Bow/Gallery.|
|Zombie Strike blasters|
|2013||Hammershot • SledgeFire|
|2014||Crossfire Bow • Doublestrike • Fusefire • Jolt • Ricochet • Ripshot • Rough Cut 2x4 • SlingFire • Sidestrike|
|2015||Doominator • FlipFury|
|2016||Brainsaw • Clampdown • Crosscut • Silentstrike|
|2017||Dreadbolt • Outbreaker Bow|